Pemko _FM_SLISF Safety Hinge

Standard Duty Anodized Aluminum Full Mortise, Short Leaf Inset Continuous Geared - designed mainly for new door applications in child care and nursing facilities. These hinges require extra clearance. Also available in heavy duty models.

  • Applied to conceal both leaves.
  • BL (Black Anodized) and PW (Painted White) are special finishes available upon request.
  • Fasteners are No. 12-24 x 11/16" #10 Head FHUC, Type C, threadforming, no tapping required.
  • Standard model: 16 fasteners required for each leaf.
  • Wood screws available on request (specify on order).
  • Standard duty hinge. 6" between bearing centers.
  • Standard duty hinges conform to Grade 3-150 and Grade 3-300 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
  • All hinges meet criteria of UBC 7.2 for positive pressure.
  • Special FirePins are only required on 3-Hour (A-Label) assemblies.
  • Certain door and frame conditions may require an extra 1/32"-1/16" clearance. Excessive clearance on fire rated assemblies may violate the requirements for NFPA 80.
  • PemkoHinge® products are guaranteed for the life of the opening against defects in material or workmanship with the exception of AL, RS, standard duty and Grade 3 hinges, which carry a 10 year warranty.
  • Weight bearing (per BHMA standard ANSI/BHMA A156.26-2006) for standard models: 83" and 85" = 14 bearings, door weight = 280 lbs.; 95" = 16 bearings, door weight = 320 lbs.; 120" = 20 bearings, door weight = 400 lbs.
  • Special hinge reinforcements are not required. Hollow metal door and frame manufacturers’ standard is acceptable. Removal of hinge reinforcements in the door and frame is not advised.
  • Width: 13/16” (20.6 mm) (between frame edge and door edge, square edge door applications).
  • Width: 27/32” (21.4 mm) (between frame edge and door edge, beveled edge door applications).
  • Cap Width: 25/32” (19.8 mm).
  • Height: 2-3/8” (60.3 mm) (to top cap/frame edge & door edge sides).
  • Height: 1-1/2” (38.1 mm) (frame edge side - leaf).
  • Height: 1-19/32” (40.5 mm) (to flange/door edge side - leaf).
  • Weight:

Ratings

BHMA Certified BHMA Certified

Finishes

BL - Black BLFMSLISF: BL - Black Anodized Aluminum, (Special Order Finish)

C - Clear CFMSLISF: C - Clear Anodized Aluminum

D - Dark Bronze DFMSLISF: D - Dark Bronze Anodized Aluminum

PW - Painted White PWFMSLISF: PW - Painted White Aluminum, (Special Order Finish)

SN - Satin Nickel SNCFMSLISF: SN - Satin Nickel Anodized Aluminum, (Special Order Finish)

Interested in this product?

Contact Us