Pemko _FS_ Full Surface Hinge

Standard Duty Anodized Aluminum Continuous Geared - designed mainly for retrofit work, and are applied to the exposed surfaces of the door and frame. Also available in heavy duty models.

  • BL (Black Anodized) and PW (Painted White) are special finishes available upon request.
  • Fasteners - Frame Portion - All fasteners are #12-24 x 7/16" FHUC, Type C, threadforming.
  • Standard model: 10 fasteners required for each leaf.
  • Wood screws available on request (specify on order).
  • Fasteners - Door Portion - a. Thru-bolt - 1/4-20 x 1-5/8". - Standard Duty Hinges - 4 required. - b. Shoulder Bolt - 1/4-20 x 1" PCH. - Standard Duty Hinges - 4 required. - c. Pan Head Self Drilling #12 x 3/4". - Standard Duty Hinges - 6 required. d. #10 x 1-1/2" Truss Head SMS. - Standard Duty Hinges - 6 required.
  • Standard duty hinge. 6" between bearing centers.
  • Standard duty hinges conform to Grade 3-150 and Grade 3-300 cycle requirements per BHMA standard ANSI/BHMA A156.26-2006.
  • Tested and certified by Underwriters Laboratories Inc. (USA and Canada) to standard UL10B, UL10C and UBC 7.2 (positive pressure) for up to a 3-Hour (A-Label) fire listing for all 4 ft. 0 in. x 10 ft. 0 in.
  • and 8 ft. 0 in. x 10 ft. 0 in. door and frame assemblies. Fire listing certifications apply to all approved hollow metal and wood door assemblies in drywall or masonry construction.
  • Aluminum continuous hinge for use on swinging type fire doors of the hollow metal, tin-clad, sheet metal and steel covered composite type rated up to 3 hours, wood covered composite type rated up to and including 1-1/2 hours. Also wood core rated up to and including 20 minutes without hose stream.
  • All hinges meet criteria of UBC 7.2 for positive pressure.
  • Special FirePins are only required on 3-Hour (A-Label) assemblies.
  • Certain door and frame conditions may require an extra 1/32"-1/16" clearance. Excessive clearance on fire rated assemblies may violate the requirements for NFPA 80.
  • PemkoHinge® products are guaranteed for the life of the opening against defects in material or workmanship with the exception of AL, RS, standard duty and Grade 3 hinges, which carry a 10 year warranty.
  • Weight bearing (per BHMA standard ANSI/BHMA A156.26-2006) for standard models: 83" and 85" = 14 bearings, door weight = 280 lbs.; 95" = 16 bearings, door weight = 320 lbs.; 120" = 20 bearings, door weight = 400 lbs.
  • Special hinge reinforcements are not required. Hollow metal door and frame manufacturers’ standard is acceptable. Removal of hinge reinforcements in the door and frame is not advised.
  • Width: 1-1/4” (31.8 mm) (frame side - leaf).
  • Width: 1-3/8” (34.9 mm) (door side - leaf).
  • Cap Width: 25/32” (19.8 mm).
  • Height: 29/32” (23.0 mm) (total height of hinge).
  • Weight:

Ratings

BHMA Certified BHMA Certified

Fire Rated - UL10C - Positive Pressure Fire Rated - UL10C - Positive Pressure

PemkoHinge Fire Rating - UL76Y2 PemkoHinge Fire Rating - UL76Y2

Finishes

BL - Black BLFS: BL - Black Anodized Aluminum, (Special Order Finish)

C - Clear CFS: C - Clear Anodized Aluminum

D - Dark Bronze DFS: D - Dark Bronze Anodized Aluminum

G - Gold GFS: G - Gold Anodized Aluminum, (Special Order Finish)

PW - Painted White PWFS: PW - Painted White Aluminum, (Special Order Finish)

SN - Satin Nickel SNFS: SN - Satin Nickel Anodized Aluminum, (Special Order Finish)

Interested in this product?

Contact Us